Used Omnitech Selex Pal 5×10 Nesting CNC Router for sale.
Coming from a small shop, this machine has been well cared for and has light use.
ONLY AVAILABLE AT END OF DECEMBER
Machine Features:
- 10HP HSK router spindle:
- 1000-24000 RPM
- Dual direction: CW/CCW
- HSK63F system with (8) tool holders
- 8-position dynamic tool changer travels with the head
- 2HP multi-spindle drill head with 9 vertical spindles: 4500 RPM
- Electronic tool touch off device for tool height setting
- Siemens 810D PC based controller
- Siemens Simodrive digital servo motors for all axis movement
- 25 HP Becker vacuum pump with 500 cbm/hour capacity
- Swivel operator control
- Safety photo-cell light barrier at machine entry
- Flip up safety hood
- Phenolic worktable with grid to accept gasket with (6) steel pop-up location pins
- Centralized lubrication points for all guideways
- Y-axis uses rack and pinion dual drive system
- X & Z axis use precision ground ball screws with anti-backlash ball nuts
- Machine footprint: 16’ x 9’ x 7.4’ (LxWxH)
- Machine weight: 5900 lbs.
- Multi-tap transformer for 230/460/575V
- Control voltage is 220V
- Total connected power: 37 kW
- Compressed air requirement: 450 litres/min = 16 CFM
- Dust extraction requirement: 3000 CFM: (1) 8” port
- Automatic blast gates which open when router or drill is in operation
Machine Specifications:
- Table size: (1550mm x 3050mm) 61” x 120” (single vacuum zone)
- Equipped with (6) six 1” dia. stainless steel pop-up pins
- Axis stroke: X-axis 1550 mm (61”’)
- Y-axis 3050 mm (120”)
- Z-axis 250 mm (9.8”)
- Maximum feed rate: X-axis 50 meters/min (1968”/min)
- Y-axis 40 meters/min (1575”/min)
- Z-axis 10 meters/min (394”/min)
Siemens Sinumerik 810D Control:
The compact control with integrated digital drives.
Compact CNC path control for series machine tools for routing & drilling with an integrated high-performance SIMATIC S& PLC, 5 integrated digital SIMODRIVE 611 drive controls and 2 SIMODRIVE 611 power sections.
The control is packaged in a 150mm wide SIMODRIVE 611 housing and consists of two components: The CCU module (Compact Controller Unit) and the CCU power section box. The system is completed with SIMUDRIVE 611 power supply and power modules.
- Three different intelligent external operator panels for a wide variety of operator needs complete the control system line-up. The SINUMERIK HT6 expands the application range for handling.
- Operator control components
- SIMATIC S& I/O modules in S7-300 packaging and/or compact I/O modules
- Inclined machining
- Tangential and analog value control
- NURBS higher level interpolation
- Comprehensive motion control for high-speed machining with:
- Look ahead function
- Dynamic feed forward control
- Programmable acceleration (smooth bed)
- Compensation of mechanical disturbances such as friction, backlash, spindle pitch errors
- Comprehensive CNC high-level language programming
- Two ISO cones included.
- Cutters not included.
Machine Details
- Condition: Good
- Year Mfg: 2003
- Electrics: 575/3/60, 31 AMPS (Via multi-tap transformer 230-380-460-575)
- Serial No.: FAANCST92045
