Technical parameters of Tug-40 Engine Lathe 1500 mm :
- Distance between centers: 1500 mm
- Center height: 217.5 mm
- maximum diameter of the rolling rails of the bed: 400 mm
- maximum diameter of turning over slide 240 mm
- maximum diameter of the rolling chosen. bridge: 640 mm
- turning length in selected. 156 mm
- torque on the spindle (at full power): 735.5 Nm 75 kGm
- maximum chip cross section (without copying device: 3.5 mm2
- number of speed stages Spindle speed: 14
- Spindle speed range: 16-1400 rpm – Speed variation: 1.41
- spindle diameter: 52 mm
- number of longitudinal feeds: 42
- longitudinal feed range: 0.045-3.36 mm / rev.
- number of transverse feeds: 42
- range of transverse feeds: 0,0225-1,68
- number of longitudinal feeds: 42
- range of fine feeds: 0,018-1,344 mm / rev.
- number of metric thread jumps: 32
- metric thread jumping range: 0.75-28 mm
- number of fine thread metric threads: 10
- thread jumping range.. : 0.3-0.9 mm
- number of inch thread jacks: 35
- inch thread pitch: 28-3 / 4 in.
- the number of inch threads.. : 19
- thread pitch range. : 70-7 1/2 w / cal.
- number of threaded modular threads: 28
- range of threaded modular threads: 0,375-14 II mm
- number of threaded DP threads: 35
- DP threading range: 56-1 1/2 II zw / cal.
- Length of bridging: 312 mm
- Taper seat: Morse No. 5
- Traveling of the tailstock: 180 mm
- Travel of the tailstock: 15 mm
- Screw travel (metric): 6 mm
- Power of the motor: 5.5 kW
- rated speed: 1450 rpm. 50 Hz
- electropump motor power: 0.125 kW
- rated revolutions: 2800 rpm 50 Hz
- Dimensions (LxWxH): 3150x1020x1250 mm
- weight of the machine: approx. 1900 kg
Please call for more information.
